Fixed aluminum banding profiles folder fixed and rapid process compared

Aluminum oxidation coloring process of fastening the aluminum banding traditional process because of their supplies, and poor efficiency gradually be eliminated. The following is fixed with the use of aluminum banding folder quickly compare the cost of the fixed profile:

The following text describes the cost and speed for comparison:
The use of aluminum oxide banding profiles, the entire course of the staff to four, two of whom are in the oxidation process of re-reinforced aluminum.
Profile folder fixed fast the whole process only two employees, because of rapid fixed folder, so in the process of oxidation and the lifting of artificial reinforcement will no longer need to save the two employees.

1. The use of oxidation folder, according to the calculation 10 times per day (under normal conditions of life of 8-10 months) then it is clear that the use of oxidation number of high-folder into more than 32,600, while the most rapid heat prices folder for each the use of only following depletion of the cost of 0.01 each.
The use of aluminum, up to 2 times after the use can not be reused, and recycled after use, must be collected manually, time, processing costs, or costs more than 25% loss by 50 tons per month, the supplies of up to 1.25 tons

2. The use of oxidation profiles folder fixed, the time required for each shelf for 10 seconds.
    The use of aluminum profiles fixed, each will take time for more than an average of up to 30 seconds.
    (This information has not been included in the re-oxidation process of the time required for reinforcement)

Note: the use of fixed profile folder because of their rapid anti-acid-base, high temperature, so there would be duplication rate is high.

Folder and rapid adoption of the spring line is the import of the spring line 316L, durable and strong.